The ComPoint-LAN-SXL offers two independently operating serial RS232 or RS485 interfaces. Each interface can be individually set and it is possible to transmit baud rates of up to 2.500.000 bauds. It is possible to additionally set emulations as Modem, Auto-Connect, Connect-On-Data, TCP / UDP client with up to 10 parallel connections, TCP/UDP server, tunnel mode with transfer of the signal statuses as well as settings, e-mail client including sending and receiving of e-mails. Optionally the Compoint-LAN-SXL is available with POE (Power over Ethernet) as well as with a 34Volt variant. In addition, the data connection can be secured against unauthorized access by third parties with integrated SSL/TLS data encryption.
Power supply
- Power supply 6Volt ca.270 mA
Optional
- POE IEEE802.3af (Power Over Ethernet)
- 34Volt switching regulator
All tensions can be switched via the internal
jumper to pin 9 of the serial interface.
Temperature range
-40°C to + 70°C
Dimensions
(WxHxL): 100 x 28 x 110 mm
1 x Ethernet
10/100Mbit RJ45(MDIX)
1 x SD CARD slot
(internal)
2 x RS232/RS485
Baud rate : up to 2.5M baud
DataBits : 7.8
Parity : Odd,Even,None,Mark,Space
RS232 Signals : TXD, RXD, RTS, CTS, DSR, DTR, DCD,RI, GND
RS485 Signals : TXD, RXD
Supported protocols
IPv4, IPv6, TCPv4, UDPv4,TCPv6, UDPv6, FTP, TFTP, ICMPv4, ICMPv6, ARP, NDP, SNMP, LPR, DHCPv4, DHCPv6, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, NetBios-NS, LLMNR, ZeroConfig(AutoIP), IP-Multicast
Emulations and functions
Modem Emulation
Connect-On-Data
Auto-Connect
Tunnel-Mode
DYNDNS-Client
FTP-Server
FTP-Client
LPR-Server
20KB Flashdrive
Flash-File-System
SD- und DF-CARD
E-Mail-Client
TCP/UDP-Client
TCP/UDP-Server
SYSLOG-Client
