XT-ATTO-LXL is a very small embedded network module, which can be easily integrated into any end device. The XT-ATTO-LXL embedded network module has the dimensions of 26 x 30 x 3mm, can be installed via a 67-pin M.2 PCI connector and can therefore be used directly or as an option in your circuit. A total of up to 10 interfaces are supported simultaneously such as UART(RS232, RS485), I2C, SPI, QSPI, CAN, Ethernet, PWM, ADC, MDIO, USB, LCD, ISC, PDMIC as well as TTL-IO. With only a few additional components, such as an RJ45 jack with integrated transformer and a 5 Volt power supply, your terminal device becomes immediately network-compatible and accessible worldwide. As OS Linux with kernel version 5.4.81-linux4sam is preinstalled.

Power supply:
5Volt / ca. 200 mA

Dimensions
26 x 30 x 3 mm

Temperature range: 
-40°C .. + 85°C

1 x Ethernet(MDIX)
Ethernet 10/100 Mbit RJ45

5 x UART(RS232/RS485) (TTL)

RS232:
Data rate: bis 2.5 MBaud
Databits: 7-8Bit
Parität: Odd,Even,Mark,Space,None
Signals: TXD, RXD, RTS, CTS, DSR, DTR ,DCD,RI, GND

RS485 :
Data rate: bis 2.5 MBaud
Databits: 7-8Bit
Parität: Odd,Even,Mark,Space,None
Signals: TXD, RXD,RS485-RW

4 x I2C (TTL)
Data rate: 100KHz -2,5MHz
Databits: 8Bit Mode:
MasterMode
Signals: SLC,SDA

4 x SPI (TTL)
Data rate : bis 25MBit(Master)
Datenbits: 8-16Bit
Mode: Master/Slave - Mode
Signals: SCK,SS,MISO,MOSI

51x GPIO (TTL)
digital Input/Output

1 x MDIO

1 x CAN

1 x USB Host 2.0/USB Device

1 x QSPI

Supported protocols:
IPv4, TCP, UDP, FTP, TFTP, ICMP, ARP, SNMP, LPR, DHCP, BOOTP, DNS, TELNET, HTML, http, DYNDNS, SMTP, POP3, SYSLOG, IPv6, NDP, ICMPv6, DHCPv6, TCPv6, UDPv6, Netbios-NS, LLMNR, ZeroConfig(AutoIP), IP-Multicast, AK-M2M, SSL 3.0, TLS1.0, TLS1.1, TLS1.2, IEEE 802.1X, SSH

Emulations and functions:
Linux-OS, Connect-On-Data, Auto-Connect, DYNDNS-Client , FTP-Server, FTP-Client, I2C - Master, SPI - Master / Slave, TTL - IO, 4GB eMMC, Flash-File-System, SD- und DF-CARD, SPI - DISPLAY, E-Mail - Client, TCP/UDP -Client, TCP/UDP -Server, SYSLOG-Clientt